|
| If its an 18 and it sorta looks like it is. The 6330 prob woant pull it. Hopefully you have fwa or have a rack full of weights on the front because you will need it. If it is an 18 unit just unbolt the last set of bottoms and run it as a 3 bottom. You should do fine. A roll over plow takes a little getting use to but does a sweet job when done properly..... best thing.... no dead furrows or backings. Makes for a nice even job. Parts shouldnt be a problem. Only thing you should need are wear parts and companies such as cfc distributers and shoup for example will have what you need. Run the JD shares if you can..... they dont have a lip on the back and they last longer.
If you play your cards right and run a long share vs a short share you can flip them and get more use out of them.
Keep the questions coming if you have more! Always plenty of people willing to help. | |
|
MF 57 Roll-over Plow
