|
roaming | If you have a planter with 2 (or more) hydraulic drives, you'll have "Seed", "Seed Left", and "Seed Right" in your Map Layer screen in the Work Condition. Use "Seed" if you want to map the entire width of the planter as one variety/product. Use "Seed Left" and "Seed Right" (2 different layers) if you want to split your planter to map different varieties on each half.
If you're using the Wizard and said "No" to the question about split-planter mapping at the beginning, the Wizard won't give you the option for left and right. You could still set this up manually, though, in the Work Condition. | |
|