|
| I've done it with a 440, fairly simple, you'll need an 115-0159-822 Null Modem Cable from Raven, or an 115-0159-040 Null modem (same cable pin-out, different Lengths). From Case you'll need a 87732647 cable ( pin to your 26 pin connector- pink goes to pin 9, blue to pin 10, black spice to pin 14). IF AND ONLY IF this is factory installed pro 700. There is a different cable for the aftermarket pro700 install. You'll set your pro 700 to COM A (which is your 26 pin connector), COM B is your serial port on the 700. You'll need 3rd party controller software put on your 700 by someone from Case. from there it's pretty intuitive to set up.
If you are doing variable rate be sure to upload the right Files.
In the 450 or 440, you'll need to turn Data logging on, Trigger Speed to Sec. and Baud rate to 9600. all under the Data Menu button. Also set to RATE 1 on the 4x0.
I think that should do you
Edited by CASEAPTECH 1/13/2012 22:58
| |
|
Pro 700 and Raven NH3 Controller
