|
Ohio | You need the following:
Cable Kit, Case IH Hybrid PN: 56694-00S
and yes also the 54612 cable from trimble and you will also need the null modum 2000819 cable to connect to the Insight.
The last thing you need is a person with experience with AP toolbox to calibrate the system for you. They should have the correct profile you would need to install to the Nav II controller so that the system will work. On another note, make sure this is a Trimble branded Nav II, if it is a CNH branded Nav II you will need to send into Ag Express to get reprogrammed so it works with the Insight. The system will work great if you have all that. Any good Trimble dealer should be able to help you out. | |
|
Insight steering an autopilot equipped STX.
