Marcus, Iowa | heres what i got.....running an insight with an application module to map on our manure tank. Running a Deere ITC receiver getting GPS to the insight. I have good differential signal on the insight, but it is not registering speed, area, ect...and not reading a heading also. everything on the GS2 that i am running for autotrack is normal as far as signals. I am running just a plain on/off whisker switch othe bar of the tank and the logging button goes green and red like its supposed to but nothing on the map. and also, is it possible to map different "loads" on this map?? I would like to keep track of different rates and also where we put on some Instinct N-Stableizer on the as-applied or tillage map. Its a little late to call tech support for the weekend, andy tips would be greatly appreciated. Thank you in advance |