|
Missouri | http://talk.newagtalk.com/forums/thread-view.asp?tid=202478&mid=150... This thred gives you the ag leader instructions on getting signal to the original greenstar. You have to have the right strings turned on in the nmea output of the 500 and the right output rate set to get it to work. This 9 pin adapter and a 9 pin output cable from the 500 to the greenstar should be all you need. I havent seen the raven cable you are talking about but I would assume it would work also if you got the strings set right in the 500 | |
|
GPS signal from EZ 500 to JD OGD
