|
| I was helped out yesterday by KRK another member of this forum. He told me to Change response valve setting #1 to 20% Setting 2 to 10% and threshold to 10. This seemed to completely solve the problem. You may want to try it as well. I tried it out and was able to spray 10gpa at 12mph and changed tips then sprayed 20gpa. Both times it held rate perfectly on the screen. The only thing I havent checked is filling up tank and spraying an entire field to make sure the actual amount sprayed equals the amount it is telling me it is applying. Hopefully weather alows me to do this in the next couple days.
Thanks
Edited by 4MSU 5/4/2011 10:31
| |
|