|
| Have a Buhler 4wd that is using a cultiva ATC version 2.00 connected to what appears to be an Outback edrive (says gps steer on top).
ATC is connected using a modem cable f-m from the com port on the ATC to the com port on the edrive. Edrive has power as the blue light is on.
Only other connection on edrive is to the hydraulic valve.
ATC has hydraulic steering activated.
Problem is that the system is giving an alarm of no communication with hydraulic steering and connection problem with tilt.
Have contacted both outback and autofarm to no avail.
Any comments would be welcomed.
Thanks | |
|
Cultiva ATC with edrive
