|
North west MN | I was thinking the same thing. I use an EZ-Guide with RTK This is what I thought would work. Go out with the Wheeler and mark your ab's and use 1 inch as your width and mark the points where ou want the edge of the planter to be. Then when you come in with the planter Restore that AB line you made with the wheeler and set your actual width and it should be right on. I haven't tried this but I know last year when I came back to spray I would restore the planting time AB lines and set my sprayer width that is 3 times the planter it worked out. With the Ez-Guide I would right down the AB number to make it Easier to find. I think your field manager will be better for naming ab lines and fields | |
|