| |
| We replaced our FMD with the new FMX from Trimble this summer and used it to do some testing on the Tru Guide passive implement steer. Now we are ready to do our strip till this fall with the Tru Tracker and do not have the right cable to get it hooked up. The cable (67092) is available but it will not be here for a week... probably 10 days till we see it due to the Holiday this week.
So I am wondering if there would be anyone out there that can get me the pinouts for cable #67092 from Trimble. I am confident we can make this cable up by using some of the cable ends off the old cable for the FMD. Any help would be greatly appreciated.
Darin
| |
|