AgTalk Home | ||
| ||
Header trailer and stalk stompers ? Jump to page : 1 Now viewing page 1 [50 messages per page] | View previous thread :: View next thread |
Forums List -> Machinery Talk | Message format |
SFO |
| ||
Findlay, Ohio | Going to a 12 row corn head, we run stompers on every row, is their a header trailer that we do not have to drop the stompers to put the header on the trailer? | ||
3bff |
| ||
central Ia. | I've been told no. | ||
tj_farmer |
| ||
NW central IL | ive got a 612 stalkmaster,ndy stompers, and a j&m cart. i have to take off 2 but usually take off 3 total to make things easier. i heard of guys mounting the two under feederhouse on the feederhouse so they dont have to be changed either, but never tried it | ||
MGfarms12 |
| ||
South Western, IL | It would maybe take some modification, possibly alot, to make it work. We have them on our 8 row and it would not work. | ||
Oliver88 |
| ||
Sw Ohio | We have a Deere 612c with lankota stompers that a friend designed to fold up. They are in 3 - 4 row sections and pivot up at a 90% angle for transport.No problem on a head trailer. | ||
SFO |
| ||
Findlay, Ohio | . | ||
Robert W Greif |
| ||
Dallas Center IA 515-720-2463 | Dose Steelworks Bouton, Iowa Do not have the number handy. They sell thru dealers. The single tube type, Not the two tube like most trailers are. Dose has both styles. E-mail address: [email protected] Below is the best pic I have. Edited by Robert W Greif 7/3/2013 07:23 (DSC01829.jpg) Attachments ---------------- DSC01829.jpg (75KB - 504 downloads) | ||
johnny skeptical |
| ||
n.c.iowa | we just bought a older stud king trailer that will allow the stalk stompers to remain on.dealer told us that stud king was going to resurrect something very similar to the trailer we bought because of the stalk stomper issue. | ||
johnny skeptical |
| ||
n.c.iowa | bobby we saw these trailers at a local dealer,i thought they looked a little light, your thoughts? | ||
Oliver88 |
| ||
Sw Ohio | No pics right now, but I will try to get some later. | ||
Ray (ecks) |
| ||
No experience with that specific trailer but have gotten other things from him. I think he builds quality products, has been great to work with as far as we are concerned. We always went directly to him, in fact a dealer gave us his number said he had what we were looking for. Seemed to be a nice guy who took pride in what he built. | |||
Chad H |
| ||
NE SD | Lankota makes stalk stompers that fold so you can flip the ones up that need to clear the tandems on a head trailer. The problem then becomes the ones under the feederhouse. Those two might have to come off to unhook. | ||
Lizton farmer |
| ||
lizton IN | Don't know much about them here is a picture (head cart.jpg) Attachments ---------------- head cart.jpg (56KB - 566 downloads) | ||
Manteno Mark |
| ||
Manteno Illinois 50 miles south of Chicago | NDY has a video on his web site that shows a 612 being loaded on a head trailer. All 12 rows on. | ||
jdg |
| ||
Cen IL | I second what mark said. Check with NDY 815-426-2330 | ||
gizmo |
| ||
Ndy stompers do not have to be removed on any of the tri cycle style header carts whether it is maurer ,J + M , e-z trail , or etc On the running gear style just the two over the tongue need to be removed Check out their website | |||
Lankota_Jake |
| ||
Lankota has the solution to these issues. Between the new Generation II Stalk Stomper design and manual flip-up mount, no Stalk Stomper removal is needed for header cart transport. Check out Lankota's website, Lankota's videos on youtube, or call Jake at 866-526-5682 | |||
Byron ECIN |
| ||
United States | Here are a few pictures of our corn setting on the head trailer We have NDY stalk stompers. no modifications were done to the head trailer. just raised the two back stands. Byron Ecin (image.jpg) (image.jpg) (image.jpg) (image.jpg) Attachments ---------------- image.jpg (81KB - 570 downloads) image.jpg (69KB - 501 downloads) image.jpg (54KB - 529 downloads) image.jpg (55KB - 561 downloads) | ||
Lankota_Jake |
| ||
Here is a view of Lankota's Generation II Stalk Stompers with the flip up mounting system. (IMG_5810.jpg) Attachments ---------------- IMG_5810.jpg (53KB - 521 downloads) | |||
Chad H |
| ||
NE SD | Those would never clear the fenders on a highway trailer. | ||
Roehm Farms |
| ||
Highland co. Ohio | Why has no one made hydraulic folding stompers yet? | ||
JDIGER |
| ||
PATRIOT HEAD CARTS (AG TALK PHOTO.jpg) Attachments ---------------- AG TALK PHOTO.jpg (62KB - 619 downloads) | |||
Lankota_Jake |
| ||
Lankota has hydraulic lift Stalk Stompers! See Lankota's website or see videos on Lankota's Youtube page | |||
Jump to page : 1 Now viewing page 1 [50 messages per page] |
Search this forum Printer friendly version E-mail a link to this thread |
(Delete cookies) | |