|
| This PTO was rebuilt about 1,000 hours ago when an employee demolished it with severe abuse.
A few days ago a different employee was using the cart to unload a grain bag due to it being too snowy to get trucks in the field. He did not notice the 3-point had settled and bent the PTO shaft. Sounds like he ran it some that way. Wondering if it being out of balance may have damaged the PTO drop box again. Sounds quiet at high RPM’s. Sounds noisy at low RPM’s. Can’t see any wobbling or anything at any RPM.
Wondering if that noise is normal or if I’ve got a problem. Can’t really say that I have ever sat there and listened to it with no load at idle before.
Video should show the noise. Thanks.
https://youtu.be/OnkYS5dQ_tc | |
|
Are Tier IV Steiger PTO’s noisy at low RPM?
