|
CENTRAL ILLINIOS | Motor burned up on this old fan and the tag is 90% gone so I cant tell what the frame number would be. Hoping someone will know. I don't even know the HP but it is an 18" fan and I see new complete 18" fans with1.5 - 3 hp motors. The old one is about 6" diameter so I am thinking it is on the low end of that range say 1.5 - 2 hp. Single phase 220V. I assume 3450 RPM. The mount for the motor is just a band that clamps around it so to accommodate capacitors they have to be positioned near the end.. 5/8 keyed shaft - see some pump motors on line but they have a threaded shaft. I've looked at some online sources for frame number classifications but not seeing anything for the clamp type mount. Any ideas?
 (fan2 (full).jpg)
 (fan3 (full).jpg)
 (fan4 (full).jpg)
Attachments
----------------
 fan2 (full).jpg (98KB - 6 downloads)
fan3 (full).jpg (132KB - 13 downloads)
fan4 (full).jpg (141KB - 6 downloads)
| |
|
Need help finding bin fan replacement motor
