|
far sNSW , Australia | Bought an old 1973 Aussy made Inter Acco bogy drive with a 392 gas engine. Has a 17ft tipping tray. I can get 16t (600 bushels) of wheat in it theoretically( not legally).The tray and tipper are worth about what I paid for it. Part way through making the bin, as shown in attached photo. I'm not really experienced at welding sheet metal. Its 1.6mm. Especially verticals. Got a cheap 240A mig. 0.9mm wire. The other question is paint. I have been recommended using a 2 pack, as it will be having urea and Ammonium sulfate through it. This particular 2 pack can't be thinned down very much and its pretty thick. Don't think it will go through my gun. Painting it with a roller and brush doesn't sound like fun. They say it doesn't need an undercoat. The other question is what to clean the metal with before painting. Thanks.
Edited by snsw no till 3/21/2017 13:36
(23mar17 003.JPG)
Attachments ---------------- 23mar17 003.JPG (101KB - 43 downloads)
| |
|