|
South Georgia | I have been burning up the boards with Trimble questions lately, I know. I've got a lot of great help here, you guys rock.
Anyway, yesterday as I was installing a new-to-me FMX in my 3330 sprayer, I came across a screen where it asked me to input the machine's physical width. The swath width is 90', so I put that in as the physical width, and I got an error telling me that the physical width is used to calculate the trajectory for automated turns. I'll attach a picture of the error. So... Are automated turns now supported? The FMX firmware version is 10.11.106008.
I had read somewhere that automated turns wouldn't be available on the FMX, but if they were, it sure would be a great thing to have on the sprayer.
Meanwhile, the most current firmware I can find available is 9.25 something or other, so I'm going to go back down to that because my FMX and Field IQ components aren't currently compatible.
Thanks for any responses.
Adrian
Edited by Adrian 2/21/2017 14:55
 (tmp_10843-IMG_20170220_152440975-2096704409.jpg)
 (tmp_10843-IMG_20170221_154721115_HDR-1328607560.jpg)
Attachments
----------------
 tmp_10843-IMG_20170220_152440975-2096704409.jpg (73KB - 195 downloads)
tmp_10843-IMG_20170221_154721115_HDR-1328607560.jpg (94KB - 203 downloads)
| |
|
Trimble... Automated turns with an FMX?
