Baden, Ontario | http://talk.newagtalk.com/forums/thread-view.asp?tid=607633&mid=5063752#M5063752 About a year ago I asked for advice for building a new shop We ended up building a 70x 92 wood building with 19' ceiling. One 24' door for main entrance with equipment and one 14' door for the service truck bay. We took about 18 x 48 feet out of the front of the shop for office, bathroom and parts counter and storage with lunchroom and more parts storage upstairs. Our heat source is heated floor. We installed a "TopRing" air system and strongly anyone to consider that if you are putting in an air system. We can cover the entire shop with our bulk oil system. We have a small designated Welding, torching, metal working area. We used "U Drain" for our floor drains. It is a fairly basic design but we are really enjoying the layout of this shop. Feel free to give any questions. (edited to add pictures and description)
Edited by ilikemysteak 1/22/2017 20:36
(2017-01-07 12.09.47.jpg)
(2017-01-07 12.09.58.jpg)
(2017-01-07 12.11.29.jpg)
(2017-01-07 12.11.42.jpg)
(2017-01-07 12.12.20.jpg)
(2017-01-07 12.12.50.jpg)
(2017-01-07 12.13.32.jpg)
(2017-01-07 12.13.52.jpg)
(2017-01-07 12.27.06.jpg)
(2017-01-07 12.32.44.jpg)
Attachments ---------------- 2017-01-07 12.09.47.jpg (94KB - 406 downloads) 2017-01-07 12.09.58.jpg (115KB - 364 downloads) 2017-01-07 12.11.29.jpg (92KB - 369 downloads) 2017-01-07 12.11.42.jpg (104KB - 388 downloads) 2017-01-07 12.12.20.jpg (66KB - 358 downloads) 2017-01-07 12.12.50.jpg (92KB - 388 downloads) 2017-01-07 12.13.32.jpg (91KB - 416 downloads) 2017-01-07 12.13.52.jpg (105KB - 405 downloads) 2017-01-07 12.27.06.jpg (86KB - 388 downloads) 2017-01-07 12.32.44.jpg (137KB - 382 downloads)
|