|
Saskatchewan | Hi,
I have a 1995 International 8100 semi.
The warning lights on the right side of the dash do not work. These are the lights for the power divider, wait to start, etc.
I took the dash apart. With the ignition on, the lights are getting 12 Volts to the one side, but they don't light up.
The lights are good - not burnt out.
Does anyone have a wiring diagram or a suggestion on where to look to chase the problem?
I already re-soldered the board, but nothing changed.
The rest of the dash works fine.
The side that isn't working has its own plug.
A bad ground somewhere?
Thanks! | |
|