|
| I am putting together a 30' nitrogen sidedresser with 360 y-drops. I have purchased raven components (flow meter, valves, ecu, and have purchased the wiring kits from Mueller electronics) I am running a Case IH 2001 mx 200 that is not ISO ready so I purchased a retrofit kit from a local Ag Leader dealer. I have power to the Retrofit Iso kit and the Integra monitor is unlocked to Virtual terminal currently. My issue is that when I go to the Virtual Terminal tab on the monitor it comes up blank, with nothing in it. It has the run screen boxes, but they are empty and I'm not sure what my next step would be to troubleshoot. The Retrofit kit came with wiring instructions and the wires are all connected properly according to the manual, and all 3 of the power lights are lit up on the retrofit kit itself. Any advice on what could be missing? Thank you in advance.
Jordan | |
|
Raven system on Nitrogen sidedresser to Ag Leader Integra
