Thompson ND / Grand Forks ND | We've got multiple 4830's with 132' Pommier booms. The 4830's have 7 factory boom shutoffs. We only use 6 setup on 22' with the Pommier boom. 22" row thing. You have to tell the sprayer there is one nozzle in the center section so that it see's 7 sections and everything works correctly. Or at least it did... Under the section control diagnostics and boom setup, you can see those 7 sections. Under the boom page in the equipment tab, you see 6 sections. Current 3.32 2630 software as well as the previous version will only show one side of the boom as applying. Revert back to 3.22 and everything works great.
Any ideas what to try?
Edited by JD_Joe 4/29/2016 00:07
 (image.jpeg)
 (image.jpeg)
 (image.jpeg)
 (image.jpeg)
 (image.jpeg)
Attachments
----------------
 image.jpeg (129KB - 77 downloads)
image.jpeg (98KB - 79 downloads)
image.jpeg (86KB - 73 downloads)
image.jpeg (100KB - 74 downloads)
image.jpeg (77KB - 74 downloads)
|
4830's with 132' Pommier booms only painting half coverage
