|
Central Ohio | So I am wondering about putting together my own drive for this planter. It has to have two drive motors. My question is, is there a motor I can use that is not "leaky" and I can run both halves in a series with one pwm valve, or will I need to go with two motors and two valves? AMD if I do this, do I just plumb them off one remote and in parallel?
I will be driving 18 rows on each side. Kinze bean brush meters almost exclusively. But I supposed whatever the setup it has better be able to drive 18 corn finger meters on each side too just in case. | |
|
DIY hydraulic planter drive kinze 3700
