|
|
South East SD | Here is how we set up our dry box spreader. Really simple got the flow meter, wiring and shaft speed sensor from Ag Express and orbit motor was just an Eaton that the local machine shop had. I bolted it all to the 1/2 flat iron for easy removal and maintenance. We also put a check valve in so we didn't accidentally run the apron back words.
 (14328181710470.jpg)
 (14328181921941.jpg)
 (14328182132592.jpg)
Attachments
----------------
 14328181710470.jpg (76KB - 128 downloads)
14328181921941.jpg (71KB - 122 downloads)
14328182132592.jpg (60KB - 146 downloads)
|
|
| |
|
East Central, Nebraska | looks good. as good or better than my factory one.
someday I am going to make myself a setup like that on an old dry box I bought from a coop to run lower rates than my primary spreader. how are you running your spinner(s) |
|
| |
|
South East SD | Spinner is just PTO. We just set gate and calibrate at that opening. An integra controls the VR. |
|
| |
|
NE Iowa | What so you think you've got invested in the cd equipment and harnesses? Considering doing that to our spreader. |
|
| |
|
fredericksburg, va | . |
|
| |
|
South East SD | I think around 3,000$ that's also a controller for the integra. |
|
| |
Some pics of variable rate on dry box spreader
