|
MB/ND border | I recently installed an Outback VSi steering wheel with Edrive TC and STX monitor in my 4wd. Installation went smoothly as did the setup but I cannot get the system to track anywhere close to straight. I realize there could be 6-8" variance of accuracy but it weaves down the field with more like 18-24". Tilt setup was performed and the only other programmable feature is "Steering Speed" which I have tried at different settings and with it set at the highest factor gave the best results but is no where near acceptable. Customer support can offer no help to get the system operating properly saying I have done the set up and fine tuning correctly.
I would appreciate any advice or suggestions. Thanks, Bart. | |
|
Outback VSi STX issues
