|
Boone, Iowa | If the cab has to come up to replace those pipes with the hoses, would this be the time to fix some problems with my remote outlets? My #1 outlet quit working all together. I replaced the female cartridges in the outlet itself, but not fix. My #2 outlet started giving me problems half way through planting corn. That outlet will raise the planter fine, but sometimes when lowering, the planter jumps but will not go down. I have to put the lever in float and then pull it back a little to where I feel some pressure, then it will go down. It may act up several times and then work fine a few times. I put the raise/lower hoses to the #3 outlet after replacing the male tips on the planter did not fix the problem. It works fine in the #3 outlet. I then put the pressure hose for the vac motors in the #2 outlet and do not have any problems with vac fluxuation. The return hose from the vac motors goes to the low pressure return. Maybe the #2 problem is on the return side cartridge(?) | |
|