|
Cedar Rapids, Iowa | The Embedded NTRIP Caster by Lefebure Design is an embedded network device designed to make your RTK correction data available to your users via the Internet. It was designed to be easy to configure, easy to connect to the NovAtel FlexPak6 RTK base station, and with low power requirements.
Specifications:
- Supports one or two simultaneous data streams, typically RTCM v3 and CMR+
- NTRIP v1 compatible
- Maximum of 20 simultaneous client sessions
- Optimized data packetization for improved network performance
- Password protected configuration can be done from anywhere on the Internet
- 10/100 Ethernet with auto-MDIX
- Uses less than 2 watts of power
- Same footprint as the FlexPak6 for easy mounting
- Designed and manufactured in Cedar Rapids, Iowa, USA
While this caster is designed specifically for the NovAtel FlexPak6, it can be used with any RTK base station that provides correction data via RS-232. Note that you may have to make a custom cable to get data and power on the proper pins.
More details can be found here:
http://lefebure.com/products/lefebure-ntrip-caster-flexpak/
-Lance
 (caster2.jpg)
 (caster.jpg)
Attachments
----------------
 caster2.jpg (40KB - 132 downloads)
caster.jpg (73KB - 133 downloads)
| |
|
New product introduction: Embedded NTRIP Caster
