|
Granville, OH | Went from a cable 1460 to 1660, our 820 has all the stuff to run electric over hydraulic but the plugs are different. The dealer gave me a plug to replace the end on the 820 but the 820 plug wires are labeled 1 2 3 and the 1660 side is labeled A B C. I tried hooking 1-A, 2-B, & 3-C and put in Auto but it does not act right. Turning the AHHC dial either results in the head going all the way up or all the way down once it starts moving. Do I have my wiring wrong? Is my potentiometer out of whack, and if so how do you set it? Is this a sign of a bad AHHC dial or potentiometer? Thanks in advance for any help. | |
|
820 on a 1660 AHHC
