|
Quebec, Canada | Hi all, To make a long story short, I bought a N-H Sp 240 F xp (miller 5240) 2 yrs ago. I ordered it trimble ready but it came with all the raven can bus wiring. I had anything but problems with trimble and apart from my dealer who is doing its best. Trimble support is crap. So I'm switching everything to Raven. I already had the ultraboom system from Raven driven with the small standalone console from factory. I'm adding Viper 4, Smarttrax, Slingshot, and accuboom. I did all the wiring myself and according to the manual all the new harnesses I plugged in the factory Raven harness look to be connected properly.
Now my problems, -Viper 4 doesn't see the slingshot modem (theres no sim card in it but I figured it should see it anyway?)
- Viper 4 doesn't see any of the 3 nodes
- I have light for power on both the ultraboom node and smarttrax. Nothing on accuboom though. No node show the light for can communication.
I'm wondering if the Trmble wiring was supplying the can with power somewhere. And now that all this wiring is gone, I would have to source it with 12V somewhere? That's my best guess. Both terminators are there where they should be according to the manual, I know it probably can be many things but I'm looking for ideas... Is the fact that the accuboom node doesn't have power, blocking all can communication? Ultraboom was working before I took trimble wiring off even though it didn't use any trimble component to work so that makes me wonder...
Worse come to worse, my rep is suppose to come with its sprayer specialist on october 7 but I would of liked to take some advance....
Thanks for helping! | |
|
Raven Can problem in N-H Sprayer
