If you haven't had solution pump trouble yet you might not realize it but the pump is not just a standard off the shelf pedestal mount pump. As far as I could find it has to come through deere. I ended up building a simple angle iron bracket that bolts on the frame where the original pump bolts that allowed me to bolt a Hypro electric clutch pump on as a replacment. The pump model is a Hyjpro 9263c-c. I had to use a longer belt than the original and the one I have on is a A 68. The belt length will vary with how you drill your holes in the angle. I am pretty sure the angle is 3x3 and I know it is at least 1/4" thick but might be 3/8. You will probably have to redo some of the plumbing. I just got this on and haven't run in the field yet. I sure hope it works out and stays together.
(100_1395.jpg)
(100_1396.jpg)
(100_1397.jpg)
Attachments ---------------- 100_1395.jpg (75KB - 153 downloads) 100_1396.jpg (76KB - 146 downloads) 100_1397.jpg (63KB - 155 downloads)
|