 | |
Minnesota | Open your Farmworks Program. Go to help tab on the top, then to "Check for Updates". In the box that pulls up in the middle of the screen you there should be two check boxes, beside one it will say "Show all available Components". Put a Check in that box and a bunch of available downloads should pull up above the check boxes. Put a Check next to the CNH and Voyager II component lines, and hit ok. The Program should download the correct components to read the data files, and I believe you will need to restart your computer when its done. But after, when you go into Read Job Data, you should be able to find the Pro600/Pro700's available on the list. Hope this helps.
Edited by IH1486 4/25/2013 21:56
| |
|
Transferring yield data from AFS on 8120 to Farmworks
