|
NW Iowa | Can anyone give me the pinouts for the round 15 pin plug on Ag Leader's Implement cable? When doing an initial install of a strip till module, I noticed I had voltage on the implement ground. I checked the wiring in the Implement cable and the polarity is reversed on all the wires. The grounds are hot and the feeds are all grounded. No shorts between any wires. I double checked the wiring at the battery and it IS correct. Pin 1 is grounded and pin 16 has 12 volts on the tractor side of that plug. Is that correct??
Edited by bushed52 4/25/2013 08:34
| |
|