|
far sNSW , Australia | Help, just tighteneing up bolt that holds chaffer up and 2 inch section of the rail came out. Where the 3/8 bolt goes in.
Has been welded poorly by previous owner. Mechenic thinks the whole riddle box has to come out as very difficult to fix it properly. Thinking we may get whole new rail to fix it quickly and properly. Any thoughts.
just going out to pull it apart now. I have to be very careful to write down the number of washers as I pull the hangers out. Worst thing is we just had it all apart and replaced all bushes, but I'm glad it happened before we started and not out in the crop where it would have made a real mess.
Edited by snsw no till 11/14/2012 22:06
| |
|