|
Sutherland, IA | Need to feed NEMA to my Integra and also hook up the 750 to the Intuicom bridge. I was able to hook the ez-steer through the middle port on the 750 so I have A and B open now. I have the Intuicom hooked to a 500 currently through the com port so it has the 9 pin connector on it's end. From what I've researched it looks like trimble cable 67091 should work to get NEMA to my Integra or other controllers. If I get two 67091's can I use the other one to connect to my Intuicom cable? Any better ways to do it? Also I read where some were having problems with the 750 where one of the ports would reset the GPS settings after every boot up. Is this still a problem? thanks | |
|