|
Western Iowa | The screw that holds the clutches onto the unit drive shaft keeps working loose. I noticed the singulation on row nine was off so I took everything apart and noticed the screw that holds the clutch on the shaft was loose and "tumbling" inside the cover and chewed up the springs that hold the drive ears. I used blue lock tite while reassembling. Checked the rest of the rows and found them all loose. Lock tited them also..After 300 more acres I found them loose again. The picture with the "T" allen wrench shows which screw is working loose. Im running jd 1760 xp with precision esets. Any suggestions.
Edited by iafarmerken 5/7/2011 23:05
 (050711205740.jpg)
 (050711205801.jpg)
 (050711205819.jpg)
Attachments
----------------
 050711205740.jpg (31KB - 42 downloads)
050711205801.jpg (36KB - 47 downloads)
050711205819.jpg (34KB - 35 downloads)
| |
|
Tru count clutches keep working loose (Pics)
