Posted 3/25/2024 16:20 (#10679979) Subject: Deere 8310 with v-ripper not want to go into ground on one side
Bloomfield MO
Using a 6 shank v-ripper on some high traffic areas, on my ridge till ground. Ripper is only a 6 shank, on 30” centers but doesn’t want to go in the ground on the outside shank. This will often alternate from side to side. Sometimes it penetrate evenly, then rise up on one side. Bar is level when in the ground as I have hydraulic top link. Is it in the draft control of the tractor?
Deere 8310 with v-ripper not want to go into ground on one side
