|
NW Iowa | I have a Pre 1999 CIH MX240 and am trying to determine the five ports that flow through the valve stack. There are three larger ones and two smaller ones, my guess is that the three larger ones are Pressure, Return and Load Sense and the smaller ones are pressure relief or drain or equalizer of some type. Can anyone tell me what each port is with confidence? Attached is a picture of the end cap/plate that seals off each side of the valve stack, I drilled and tapped a hole on one of the ports thinking that it was probably the pressure residing between the two mounting bolts. Before I put it on and test it, I was hoping that I could get a confirmation.
Edited by moonlighterag 3/8/2016 14:32
(IMG_20160308_142257227_HDR.jpg)
Attachments ---------------- IMG_20160308_142257227_HDR.jpg (188KB - 59 downloads)
| |
|