|
| I have am MX150 with a powershift problem. Originally I had no 1st or 3rd range. The tractor would engage in 1st and 3rd but would not move. After tractor set for a few days we went back to it and had 1st but still no third. We replaced S1 and S2 solenoids on powershift valve. The tractor would engage in 3rd but still not move. Dealer had us remove powershift valve and check for sticking spools but they seem to be OK with no broken springs.. They told is something about airing up the clutches through the jumper tubes. Does anybody have any knowledge about the tubes and procedure for testing them? Has anyone had this issue? We also have checked the solenoid voltage to make sure they are correct. We have had a problem with Case 52 series going into two ranges in one time but never any issues with the MX150 until now. AnY suggestions or help would be appreciated! | |
|
MX150
