Posted 5/2/2014 22:11 (#3850849) Subject: not getting enough flow, newly installed twin flow system on 485stx
Have just put on the twin flow pump and plumbed it into existing remotes to add enough flow for our 3310 bourgault seeder and can't get more than one remote to pressure up at a time. Does the twin flow pump have to be adjusted or matched to the original pump. What am I missing? It is a pressure compensating pump, and the load line is also teed into the existing load sense line which is how it shows should be installed.
Any info would be appreciated!!!
Thanks.
not getting enough flow, newly installed twin flow system on 485stx
