|
WC Iowa | Messing around with the offsets this spring to make the autotrac work better in adaptive curves I found that if i changed the value in the tractor offset for the receiver height to lower numbers i would more accurately go around hills. Since I have a receiver height setup in the ITC receiver and its correcting the position, do I even need to put a receiver height in the tractor offsets and because I had been has it been double correcting for the terrain? Also why does the "advanced setup" button not show up in adaptive curves guidance setup on all the displays except the one that is still on its autotrac demo, i run autotrac SF2 with updated software on 3 others and the only one that has the advanced is the one that is in demo. | |
|