|
Nashville, IL | Run in Raven rate controller on an nh3 bar. Plumbed 5 sections. Two valve control. Got everything running through a 2630 screen. Problem I'm having now is my swath control. It will turn on and JD off as one bar, not individual sections. On the 2630, I went to section control, clicked the box for master on/off, and then under that there is a box for nh3 section control. With both boxes checked, all valves close and it won't turn on at all. On my steering page I can unclick the swath control box and it'll work, but as one section.
Anyone have any ideas on how to get it to work as 5 sections. The equipment tab, implement one is my bar, it shows 5 sections set up the same as it is in the raven controller. | |
|