|
South Australia | Hi I'm posting this for my brother who'shaving issues with a 252 on RTK.
He has a New Holland T9040 tractor running the New Holland Intellisteer with a 252 receiver on RTK with an generic CMR input into port C. The RTK takes a long time to get DGPS to appear and when the tractor moves past a tree it takes up to 30 minutes for the DGPS to resume. The CMR is at 38400 baud and port C is set to input CMR at 38k.4 8N1 O RtkLnk 83k.4. RTK Vel type is Rtk only, Float SV mode is Use high 5 SNR, RTK Prop Mode is low Larency, Satellite baude is 1200bps, DGPS Corr Age is 250 second limit, DGPS Mode Auto on/off.
I had lots of dropouts with 252 on NH combine at harvest but with my CFZ750 I have very few problems, is it a 252 problem generally?
Any Ideas would be much appreciated.
Russell | |
|