Viewing a forum - Precision Talk

Forums | Classifieds (52) | Skins | Language

You are logged in as a guest. ( logon | register )

Precision Talk
		Message format

Jump to page: < 648 649 650 651 652 653 ... 654 655 656 657 658 659 660 ... > Forums List -> Precision Talk

Swath Pro/Coverage Map problems with 1770 NT CCS - NHpuller : 5/16/2013 01:21
- Re: Swath Pro/Coverage Map problems with 1770 NT CCS - Coastal : 5/16/2013 06:23
- Re: Swath Pro/Coverage Map problems with 1770 NT CCS - ProCross : 5/16/2013 06:42
  - Re: Swath Pro/Coverage Map problems with 1770 NT CCS - PrecisionNE : 5/16/2013 10:08
    - Re: Swath Pro/Coverage Map problems with 1770 NT CCS - Trac9410 : 5/19/2013 08:24

Geosteer high voltage limit and erratic steering - DevinF : 5/15/2013 23:56

Pro 700 trim button won't respond? - h2oski01 : 5/15/2013 23:28
- Re: Pro 700 trim button won't respond? - caseih9280 : 5/16/2013 08:38

help! integra with paradyme not guiding on-center - chirpfarm : 5/15/2013 23:14
- Re: help! integra with paradyme not guiding on-center - averagejoe : 5/16/2013 06:04

Precision Farming from Garmin...? - keyser_soze : 5/15/2013 23:07

might be hard on the gps. this one has some punch. - hyseed : 5/15/2013 23:00

john deere rtk? - farmnmn : 5/15/2013 22:42
- Re: john deere rtk? - glensts : 5/15/2013 23:09
  - Re: john deere rtk? - PrecisionNE : 5/16/2013 10:13
- Re: john deere rtk? - HowieMcG : 5/17/2013 15:25

another Cruiser 2 question - 4450 : 5/15/2013 22:14
- Re: another Cruiser 2 question - Amc4life : 5/15/2013 22:37

GreenStar Rate Controller Issues - BertholdAg : 5/15/2013 21:58
- Re: GreenStar Rate Controller Issues - Sidedresser : 5/16/2013 01:28

Omnistar Issues - deere4760 : 5/15/2013 21:25
- Re: Omnistar Issues - Mbmaring : 5/15/2013 21:39
- RE: Omnistar Issues - smallchev : 5/15/2013 22:28
- RE: Omnistar Issues - cotton880 : 5/15/2013 22:37
  - RE: Omnistar Issues - sparrell : 5/16/2013 07:10
- Re: Omnistar Issues - cyclones30 : 5/16/2013 07:02
  - Re: Omnistar Issues - Farmboy84 : 5/21/2013 23:57
- RE: Omnistar Issues - RalphC : 5/26/2013 22:08

Viper Pro - rogator22 : 5/15/2013 20:49
- Re: Viper Pro - RedRules434 : 5/15/2013 21:52
  - Re: Viper Pro - Amc4life : 5/15/2013 22:39

2013 24 row case planter - CaseFarmer : 5/15/2013 20:48
- Re: 2013 24 row case planter - AFS kyle : 5/15/2013 20:55
  - Re: 2013 24 row case planter - schneidy71 : 5/15/2013 21:44
  - Re: 2013 24 row case planter - CaseFarmer : 5/15/2013 21:50
- Re: 2013 24 row case planter - AFS kyle : 5/15/2013 22:11
- Re: 2013 24 row case planter - CaseFarmer : 5/16/2013 04:50
- Re: 2013 24 row case planter - AFS kyle : 5/16/2013 07:20

Topcon Precision Agriculture? - Fla Veggie Farmer : 5/15/2013 20:23
- Re: Topcon Precision Agriculture? - Super 65 : 5/16/2013 00:00
- RE: Topcon Precision Agriculture? - Philbert : 5/16/2013 05:36
- Re: Topcon Precision Agriculture? - wimpy : 5/16/2013 22:20
- Re: Topcon Precision Agriculture? - FRMLPLR : 5/17/2013 00:35
- RE: Topcon Precision Agriculture? - Fla Veggie Farmer : 5/17/2013 18:20
  - Re: Topcon Precision Agriculture? - Jacob Bolson : 5/17/2013 22:29
  - RE: Topcon Precision Agriculture? - pharmhed : 5/24/2013 14:36

Jump Start Switch - FarmWeather : 5/15/2013 19:55
- Re: Jump Start Switch - FarmWeather : 5/15/2013 23:04
- Re: Jump Start Switch - FarmWeather : 5/16/2013 08:40

multi-product question on integra - 232SS : 5/15/2013 19:49
- Re: multi-product question on integra - NEILFarmer : 5/15/2013 21:03
  - Re: multi-product question on integra - 232SS : 5/15/2013 21:32
    - Re: multi-product question on integra - JD4920 : 5/15/2013 21:43
    - Re: multi-product question on integra - NEILFarmer : 5/15/2013 21:46
- Re: multi-product question on integra - superfarmer : 5/16/2013 05:42
- Re: multi-product question on integra - benc : 5/16/2013 06:06
- Re: multi-product question on integra - Timd3200 : 5/16/2013 08:29

FM 750 to run kinze? - BurkFarms : 5/15/2013 19:30
- RE: FM 750 to run kinze? - evil lanky me : 5/16/2013 07:16
  - RE: FM 750 to run kinze? - George_CPA : 5/16/2013 07:44
    - RE: FM 750 to run kinze? - scottpf : 5/16/2013 21:09
      - Re: FM 750 to run kinze? - buck1400 : 5/17/2013 05:31

cruizer/smartsteer settings? - gene_champ : 5/15/2013 19:05
- Re: cruizer/smartsteer settings? - Amc4life : 5/15/2013 22:43

itc issue - massman1 : 5/15/2013 18:35
- Re: itc issue - Lil' Hoss : 5/15/2013 19:04
  - Re: itc issue - massman1 : 5/15/2013 19:12
    - Re: itc issue - Lil' Hoss : 5/15/2013 19:58
      - Re: itc issue - PrecisionNE : 5/16/2013 10:32

Case IH autosteer ---- roading mode on - Keith Mudd : 5/15/2013 16:52
- Re: Case IH autosteer ---- roading mode on - jcfarmboy : 5/15/2013 17:34
  - Re: Case IH autosteer ---- roading mode on - Keith Mudd : 5/15/2013 21:43
- Re: Case IH autosteer ---- roading mode on - IH1486 : 5/15/2013 18:35
  - Re: Case IH autosteer ---- roading mode on - Keith Mudd : 5/15/2013 21:41
    - Re: Case IH autosteer ---- roading mode on - IH1486 : 5/15/2013 22:53
- Re: Case IH autosteer ---- roading mode on - Followme : 5/16/2013 19:19

Field IQ controlling Bestway Field Pro IV - Gvheagle : 5/15/2013 14:44
- RE: Field IQ controlling Bestway Field Pro IV - arcticcatfarmer : 5/16/2013 06:48

another Case and Deere question. - jcfarmboy : 5/15/2013 13:00
- Re: another Case and Deere question. - jcfarmboy : 5/15/2013 13:11
  - Re: another Case and Deere question. - RyanD : 5/15/2013 13:31
- Re: another Case and Deere question. - AFS kyle : 5/15/2013 13:40
- Re: another Case and Deere question. - jcfarmboy : 5/15/2013 14:54
  - Re: another Case and Deere question. - bleedred : 5/15/2013 21:02
    - Edit... - bleedred : 5/15/2013 22:35
- Re: another Case and Deere question. - jcfarmboy : 5/15/2013 15:00
  - Re: another Case and Deere question. - MAnthony0 : 5/15/2013 18:28
  - Re: another Case and Deere question. - AFS kyle : 5/15/2013 19:13
- Re: another Case and Deere question. - Gerard : 5/15/2013 19:37
- RE: another Case and Deere question. - bleedred : 5/15/2013 22:38
- Re: another Case and Deere question. - jcfarmboy : 5/16/2013 06:02
- Re: another Case and Deere question. - jcfarmboy : 5/16/2013 06:36
  - Re: another Case and Deere question. - bleedred : 5/16/2013 07:15
- Re: another Case and Deere question. - AFS kyle : 5/16/2013 07:16

Upgrading AFS v12.0x to v12.5x - dirtdoctor : 5/15/2013 12:36
- Re: Upgrading AFS v12.0x to v12.5x - torn : 5/15/2013 12:55
- RE: Upgrading AFS v12.0x to v12.5x - tj_farms : 5/16/2013 05:35
  - RE: Upgrading AFS v12.0x to v12.5x - torn : 5/16/2013 06:48

Problem With Trimble to Deere Interface Box - SJ@Farmacres : 5/15/2013 12:36
- Re: Problem With Trimble to Deere Interface Box - otc509 : 5/15/2013 21:19

Ontrac and jd 8320 - rupert : 5/15/2013 12:11
- Re: Ontrac and jd 8320 - Jackrabbit : 5/15/2013 12:57
- Re: Ontrac and jd 8320 - Allis4ever : 5/15/2013 17:10
  - Re: Ontrac and jd 8320 - rupert : 5/15/2013 17:18
    - Re: Ontrac and jd 8320 - Allis4ever : 5/15/2013 21:41
    - Re: Ontrac and jd 8320 - keyser_soze : 5/15/2013 22:39
      - Re: Ontrac and jd 8320 - Allis4ever : 5/15/2013 23:22
        
        Re: Ontrac and jd 8320 - keyser_soze : 5/16/2013 22:49
- Re: Ontrac and jd 8320 - gpsdude : 5/16/2013 07:37

372 and a 262 receiver on RTK - cbellhouse : 5/15/2013 12:03
- Re: 372 and a 262 receiver on RTK - softtail : 5/15/2013 12:21
- RE: 372 and a 262 receiver on RTK - johand : 5/15/2013 14:19
  - Re: 372 and a 262 receiver on RTK - CLLEWISON : 5/15/2013 17:30
- Re: 372 and a 262 receiver on RTK - benc : 5/16/2013 05:52

autosteer disengages - Y2k : 5/15/2013 11:37
- Re: autosteer disengages - softtail : 5/15/2013 12:22
- Re: autosteer disengages - Fingers77 : 5/15/2013 13:31
- Re: autosteer disengages - amax : 5/15/2013 19:30

Trimble FMD - jedeka : 5/15/2013 11:24

Found the rtx convergence number in my fm 1000. - arcticcatfarmer : 5/15/2013 11:05

1770nt ccs will not plant - FallcreekFarmer : 5/15/2013 10:15
- Re: 1770nt ccs will not plant - agview_precision : 5/15/2013 13:52
  - Re: 1770nt ccs will not plant - FallcreekFarmer : 5/15/2013 19:41
    - Re: 1770nt ccs will not plant - PrecisionNE : 5/16/2013 10:35

New Kinze 3600ASD ISBUS w FMX issues. Need help. - 3pete : 5/15/2013 08:48

Pro 600 issue - waiting for nav to calculate swath data - Chains77 : 5/15/2013 07:59

Pro 600 as a light bar in a Puma 130 - Chains77 : 5/15/2013 07:49
- Re: Pro 600 as a light bar in a Puma 130 - AFS kyle : 5/15/2013 12:44
- Re: Pro 600 as a light bar in a Puma 130 - Chains77 : 5/17/2013 10:41

Where is engage switch on 665D - gpsdude : 5/15/2013 07:36
- Re: Where is engage switch on 665D - fsdan : 5/15/2013 10:53
- RE: Where is engage switch on 665D - Philbert : 5/15/2013 12:20
- Re: Where is engage switch on 665D - Twister : 5/15/2013 22:37
  - Re: Where is engage switch on 665D - fsdan : 5/16/2013 20:12

WAAS does move around - Bobby Greif : 5/15/2013 07:04
- Re: WAAS does move around - superfarmer : 5/16/2013 05:47
  - OnTrac2 - Bobby Greif : 5/16/2013 06:33
- RE: WAAS does move around - RalphC : 5/26/2013 22:16

Pro 700 not saving offset - WLR : 5/15/2013 06:48
- Re: Pro 700 not saving offset - AFS kyle : 5/15/2013 12:46
  - Re: Pro 700 not saving offset - WLR : 5/15/2013 19:21
- Re: Pro 700 not saving offset - torn : 5/16/2013 09:37

Deere monitor rant... - bleedred : 5/15/2013 06:35
- Re: Deere monitor rant... - slawrence : 5/15/2013 07:33
  - Re: Deere monitor rant... - DEHunter : 5/15/2013 12:32
- RE: Deere monitor rant... - dpilot83 : 5/15/2013 08:50
  - RE: Deere monitor rant... - bleedred : 5/15/2013 08:55
    - Re: Deere monitor rant... - Lil' Hoss : 5/15/2013 19:15
- Re: Deere monitor rant... - slawrence : 5/15/2013 15:42
- RE: Deere monitor rant... - bleedred : 5/16/2013 01:22

Fmx/fm1000 - jerhalco : 5/15/2013 05:21
- Re: Fmx/fm1000 - raider2b : 5/15/2013 06:47
  - Re: Fmx/fm1000 - jerhalco : 5/16/2013 12:29

AgGPS_542 - shaulinis : 5/15/2013 03:14

RTX - trent_west_aust : 5/15/2013 01:13
- Re: RTX - ben9380 : 5/15/2013 02:44
  - Re: RTX - Trimble Man : 5/15/2013 05:27
- RE: RTX - Bigboyfloyd : 5/15/2013 06:36
- Re: RTX - chedv : 5/19/2013 07:25

Brand new kinze requires implement offset? - Ellison : 5/14/2013 23:44
- Re: Brand new kinze requires implement offset? - CLLEWISON : 5/15/2013 00:16
- RE: Brand new kinze requires implement offset? - PaKettle : 5/15/2013 06:58
  - RE: Brand new kinze requires implement offset? - Ellison : 5/15/2013 08:23
    - Re: Brand new kinze requires implement offset? - benc : 5/15/2013 11:08
    - Re: Brand new kinze requires implement offset? - benc : 5/15/2013 11:10
- RE: Brand new kinze requires implement offset? - Ellison : 5/15/2013 21:00
- RE: Brand new kinze requires implement offset? - Ellison : 5/15/2013 23:19
- Re: Brand new kinze requires implement offset? - superfarmer : 5/16/2013 05:53
  - Re: Brand new kinze requires implement offset? - KinzeMech : 5/16/2013 21:52
  - Re: Brand new kinze requires implement offset? - Ellison : 5/16/2013 22:12

Trimble FMX Vacuum Cal problem???? - Bigboyfloyd : 5/14/2013 23:11
- Re: Trimble FMX Vacuum Cal problem???? - golfnut : 12/6/2013 14:12

ez-guide plus and ez-steer - ebernuts : 5/14/2013 23:02
- RE: ez-guide plus and ez-steer - Mmaxed : 5/15/2013 08:48

solar flares again - Art Swannack : 5/14/2013 22:48

Deere autotrac issues with Autopilot - littlehollander : 5/14/2013 22:46
- Re: Deere autotrac issues with Autopilot - littlehollander : 5/14/2013 22:49
  - Re: Deere autotrac issues with Autopilot - aglasergps : 5/15/2013 04:43
- Re: Deere autotrac issues with Autopilot - JD8520 : 5/16/2013 21:29

Deere to Trimble? - ndred : 5/14/2013 22:36

torn 700? Operational instance - dap54 : 5/14/2013 22:32
- RE: torn 700? Operational instance - torn : 5/14/2013 22:49

Weird speed issues on PF3000 - Farms With CASE : 5/14/2013 22:26

Upgrading Brownbox - Hanorob : 5/14/2013 22:13
- Re: Upgrading Brownbox - REVBCO : 5/14/2013 23:52
  - Re: Upgrading Brownbox - Hanorob : 5/15/2013 08:34
    - Re: Upgrading Brownbox - PrecisionNE : 5/16/2013 12:17

Deere rate controller half width disconnect??? - cordellh : 5/14/2013 22:04
- Re: Deere rate controller half width disconnect??? - AGB : 5/15/2013 10:19
  - Re: Deere rate controller half width disconnect??? - UNL84 : 5/15/2013 21:43

engaging autotrac - farmhelper : 5/14/2013 21:55
- Re: engaging autotrac - kyler309 : 5/14/2013 22:18
- Re: engaging autotrac - cobra : 5/19/2013 22:35

Jump to page: < 648 649 650 651 652 653 ... 654 655 656 657 658 659 660 ... > Forums List -> Precision Talk
(Search this forum)

(Delete cookies)